Yamaha Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
I have spark on my machine, but it won't start. I replaced the CDI box to no avail. I checked the ohms of the stator and I'm leaning towards the pickup coil. Tell me what you think.

The source coil spec should be between 270 - 330 ohms. I got 250. I'm guessing that 250 would still run because it is less resistance than spec. But I'm not positive.

I do know that my pickup coil is bad because I get 350 ohms and spec is 171 - 209.

So, will the ATV run with the source coil at 250 if I replace just the pickup coil? Or should I replace the entire stator?

Thanks.
 

·
Banned
Joined
·
2,476 Posts
I'd replace the whole thing in one shot. Stators, at least on my bike, are a pain in the ass to replace so if I were you, I'd replace the whole thing. My guess is that it should run with the 250, but I'd still replace it.
 
1 - 3 of 3 Posts
Top