Yamaha Forums banner
1 - 3 of 3 Posts

·
Banned
Joined
·
2,476 Posts
Discussion Starter · #1 ·
After having a hard time finding the stock flasher relay on my '07, I figured I'd post up a how-to for replacing the relays with aftermarket one's.

Here is what the stock relay looks like:


 

·
Banned
Joined
·
2,476 Posts
Discussion Starter · #2 ·
2006 & 2007 R6 location:

1) Lift up the tank


2) Relay is under the back part of the tank, you will have to move the shielded piece of rubber to get to it:




3) Close up of the plug as it sits:


4) Looking from the front of the bike, the stock relay is where my aftermarket (CustomLED) one sits:


5) Unplug the stock relay, plug in the aftermarket relay you bought and put the relay and wire back in and you are done!
 

·
Banned
Joined
·
2,476 Posts
Discussion Starter · #3 ·
2008 & 2009 R6 location

1) Take off front seat and move over the ECU (Big box with a lot of wires coming out of it:



2) After the ECU is pushed over to the side, remove the stock relay and replace it with your aftermarket relay:


3) Put the new relay and wire back into place:


4) Put ECU back into place and put seat back on and you are done!
 
1 - 3 of 3 Posts
Top